Bench Table Saw

An Exaktor Sliding Table is a definite asset to your woodworking shop. Available in three sizes and designed to fit most table saws, our sliding tables make it easy and safe for one person to cut large, heavy panels or long stock. ....read more

Designed especially for home butchers, this upright design takes up less room and features a sliding table so meat processing is a breeze. All stainless steel table and fence components conveniently disassemble for easy clean-up. 77-1/2 blade length. All ball bearing wheels. Approximate shipping weight of 123 lbs. ....read more

This value-priced combo includes the Miter 1000SE gauge and the Incra Miter Express. Enjoy unmatched miter gauge precision combined with a sliding table with workpiece support on both sides of the blade.

The Miter 1000SE lets you achieve mitering accuracy you never thought possible.
* 41 angle stops in 5 increments over a full 180 range.
* Miter bar adjusts to any standard 3/4 x 3/8 slot.
* Stainless steel primary scale.
* 1/10-degree vernier cursor.
* Incremental fence with patented rack positioning control telescopes from 18 to 31.
* Dual-arm flip shop stop.

The Miter Express is the safest and most accurate crosscutting and mitering platform available, providing smooth-sliding zero-clearance cuts.
* Features two embedded T-Slot channels to secure the included hold-down clamp and outboard fence support.
* Superb crosscut and mitering control.
* Doubles any miter gauge's crosscut range up to 24.
* Safely handles extra large and small workpieces.
* Eliminates all side play between table saw's miter slot and any miter gauge.
* Eliminates all drag between workpiece and table saw, especially for extra large workpieces.
* Made in USA. ....read more

Increase the function of your DEWALT table saw without sacrificing space with the DEWALT DW7461 sliding table. This DEWALT accessory is designed for precision, providing 30 inches of cross-cut capacity at 90-degrees with the ability to cut most difficult angles efficiently. The table is also easy to collapse and store with the exclusive quick action lock and release. Crafted from precision machined cast-iron, this durable table is built to last. Included with the table is the DEWALT mitering guide and rugged self cleaning slides. ....read more

....read more

Festools TS 55 EQ keeps all the great features of its predecessor and adds new features that make the plunge saw more convenient, more capable and more user friendly. A new, larger Thumb Interlock makes it easier to switch on the power and pivot the blade down for cutting, while a new Blade Lock disconnects the power switch, and locks the blade down in position for removal. Plunge cuts in the middle of a workpiece are easier than ever, since the riving knife is now spring loaded, and automatically retracts when plunging. When used with the Festool Guide rail system, the TS 55 ideal for installation of laminate flooring systems, and allows cutting just 3/8 off a wall. Cross cutting veneered materials with most circular saws leaves a splintered mess. Festools new sacrificial Splinter Guard rests on the workpiece directly above the cut, providing zero clearance support at the blade for the top veneer, resulting in clean, chip-free cuts in melamine, veneered plywood, and even high-pressure laminates. The suggested 55 guide rail allows for fast precise cuts with little or no setup time, since the edge guide automatically aligns to the cut-line. Electronic variable-speed control automatically maintains a constant blade speed under load, and the soft start and automatic idle cut down on operator fatigue and noise. Surprisingly, the Festool TS 55 EQ uses a 6-1/4 diameter blade, but still provides a 1-15/16 cut at 90 degrees, and 1-7/16 cut at 45 degrees -- plenty to cut construction 2x stock. Festool TS 55 EQ includes a systainer storage box, 48-tooth carbide tipped blade, 55 guide rail, limit stop and chip deflector. ....read more

LABEL,SLIDING MITER TABLE,LOCK ....read more

Take your table saw to a higher level of precision and performance with the Mast-R-Slide Sliding Cross-Cut Table. A sliding table allows you to cross cut larger panels than a miter gauge or cross-cut sled and provides a safer and more stable means of supporting the work-piece through the cut. This high quality table saw system features a network of beautifully engineered aluminum extrusions, steel guide rails and precision bearings designed to create the ultimate cross-cutting solution. Designed to replace the left extension wing on most American style cabinet saws and contractor saws, it bolts easily onto the saw with a quick, no-hassle setup. The Mast-R-Slide system features JessEms innovative Posi-Trak bearing guided multi-rail system for an exceptionally smooth and accurate glide from one end of the travel range to the other. The guide mechanism is comprised of 30 double-sealed precision bearings positioned in a staggered design to provide constant contact to the guide rails throughout its travel. The sliding table is easily adjustable to level with the saws tabletop and to align it parallel to the cutting blade. Also included is an outrigger support table that is fully adjustable for positioning in a fixed location anywhere along the length of the sliding table. The 28 extruded aluminum fence extends outward for a maximum measured cut length of 48 with the flip-stop, and makes mitered cross-cuts up to 45 degrees in both directions. The Mast-R-Slide Sliding Table offers three positions for the fence, two front end positions (one optimal location for mitered crosscuts and another allowing for an increased cutting width at 90 degrees) and a rear end position for a maximum cross-cut capacity of 36. The fence is easily moved from one position to the other and quickly removes from the sliding table for unobstructed use of the table saw while utilizing the rip fence. ....read more

Our Signature Series of panel saws features a massive 10.5-foot precision sliding table. This series of saws is available from those with manual controls up through fully programmable automated saw and fence systems. The standard positive stop miter fence provides repeatable accuracy, while the optional 50/50 crosscut carriage allows you to pivot the entire crosscut table up to 50 degrees in either direction. Our Digit version provides affordable automation, while our Program version includes Siemens Simatic touch-screen controls for maximum efficiency.
MG00510

Standard Equipment:

59 Rip Capacity

Electronic Read Outs

Full Dado Capacity

Laguna's Unique Dado

Scoring

Optional Equipment:

Fully Computerized Fences

(rip and crosscut)

Overhead Panelborad

....read more

....read more